Connecting A Dvd Player With Component Out; Connect The Lcd Monitor To A Dvd Player - NEC LCD3000 User Manual

Connecting a DVD Player with component out

Connecting your DVD player to your LCD monitor will enable you to display DVD video.
Refer to your DVD player user's manual for more information.

Connect the LCD Monitor to a DVD Player

• To connect the RGB 3 DVD/HD In connector (BNC) on the LCD monitor, use a separately available BNC connector cable.
You will need a separately available BNC-to-RCA adapter to connect a DVD player with an RCA pin jack to the BNC
connector cable.
Some DVD players may have different connectors such as Cr/Pr, Y and Cb/Pb.
Select [DVD/HD] input mode from the INPUT button.
When connecting one or more LCD monitors, use the RGB 3 OUT connectors (BNC).
The AUDIO IN 2 and 3 (both RCA) can be used for audio input. For connection, select [AUDIO 2] or [AUDIO 3] from the
AUDIO INPUT button.
LCD monitor
LCD monitor (second monitor)
01_English
To DVD Component video output
BNC x 3
To RGB 3 DVD/HD IN
14
DVD player
English-14
15/10/02, 12:08 pm
BNC x 3