Terminal Panel - NEC LCD3000 User Manual

Terminal Panel

8
AUDIO
VIDEO VIDEO O O IN IN IN 3 IN 2
OUT OUT
S-VIDEO IN
7
1
AC IN connector
Connects with the supplied power cord.
2
RGB 1 IN (DVI-D)
To input digital RGB signals from a computer having a digital
RGB output.
* This connector does not support analog input.
3
RGB 2 IN (mini D-Sub 15 pin)
To input analog RGB signals from a personal computer or
other RGB equipment.
4
RGB 3 DVD/HD [R/Cr/Pr, G/Y, B/Cb/Pb, H, V] (BNC)
IN connector: To input analog RGB signals or signals from
other RGB equipment.
This is also to connect equipment such as a DVD player and
HDTV laser disk player. A Sync-on-Green signal can be
connected to the G/Y connector.
5
RGB OUT connector (BNC)
To output the signal from RGB 2 and 3.
01_English
10
9
5
VIDEO RGB OUT
OUT R G B H V
R/Cr/Pr G/Y H V
RGB 2 (D-SUB)
IN
4
6
3
RGB 1 (DVI-D) AUDIO 1
PC IN
3 2
6
AUDIO IN 1, 2, 3
To input audio signal from external equipment such as a
computer, VCR or DVD player.
7
AUDIO OUT
To output the audio signal from the AUDIO IN 3 jack.
8
VIDEO
VIDEO IN connector (BNC and RCA): To input a composite
video signal. BNC and RCA connectors are not available at
the same time. (Use only one input).
VIDEO OUT connector (BNC): To output the composite
video signal from the VIDEO IN connector.
S-VIDEO IN connector (DIN 4 pin): To input the S-video
(Y/C separate signal).
9
EXTERNAL CONTROL (mini D-Sub 9 pin)
IN connector: Use when operating the LCD monitor from
the RGB equipment like a computer.
10 EXTERNAL SPEAKER TERMINAL
To output the audio signal from AUDIO 1 or 2 or 3 jack.
English-3
15/10/02, 12:07 pm
1