Table of Contents
Advertisement
Item
COPIES
DUPLEX
BINDING
OUTPUT BIN
JOB OFFSET
PAPER FEED
AUTO TRAY
SWITCH
TRAY
SEQUENCE
MP TRAY
USAGE
MEDIA CHECK
TRANSPARENCY
DETECT
Print Menu
The default settings are bold.
Value
1 to 999
On; Off
Long edge; Short
edge
Face Up; Face Down
On; Off
Tray 1; Tray 2; Tray 3;
Tray 4; Tray 5; MP
Tray
On; Off
Down; Up; Paper
feed tray
Normal tray; High
priority tray; Feed
when mismatching;
Do not use
Enable; Disable
Auto; Disable
ES 3037/3037e Setting up • 55
Description
Sets the number of copies.
Specifies two-sided (duplex) printing
if the optional duplex unit is installed.
Sets binding for duplex printing. Only
displayed if duplex is ON.
Specifies output bin.
Sets job offset on or off.
Selects source of paper feed. Tray 2
to 5 only displayed if installed.
Automatic switching to next tray
when tray in use empties.
Specifies selection order priority for
switching Auto Tray Select/Auto Tray
Switch.
Specifies MP tray usage.
Normal tray: (Tray select/switch)
Use as a normal tray.
High priority tray: (Valid with Tray
select only). If there is paper in the
MP tray and Duplex is not specified,
the printer uses the MP tray.
Feed when mismatching. When a
paper mismatch occurs (i.e. the
tray's paper size/media type does
not match the print data), a paper
request is issued to the MP Tray. If
the data is for Duplex print, a
specified tray is used instead of the
MP tray.
Do not use. Even if auto switching,
MP Tray will not be used. If MP Tray
is designated in Paper Feed, printer
behaves as though Normal Tray is
selected.
Sets whether the printer checks the
matching of paper size to that of the
tray. Only standard sizes are
checked.
Enable/Disable the transparency
auto detect function.
Advertisement
Chapters
Table of Contents
