Oki 3037 User Manual page 161

PCL: This automatically generates a BIN file.
At this step, you will see in the project window that the BIN file is
assigned an ID number. You can change this ID number by
double-clicking it, and entering a new one in the ID field.
PostScript: This automatically generates a PostScript hst file. Note
the name that the file is assigned in the Storage Device Manager.
Names are case sensitive.
For PCL and PS: this is important because you need to use
this ID number or name when creating overlays in the printer
driver. Therefore, it is recommended you change the ID
number or name from the default value and note it for later
use.
4. Make sure the printer being used is highlighted in the lower
window of the Storage Device Manager.
5. Select the
to Printer.
This downloads the file to the printer. The Storage Device
Manager displays "Command Issued" to indicate that the file was
downloaded successfully.
6. Close the Storage Device Manager.
Important!
NOTE
Project menu and then choose
ES 3037/3037e Windows XP Operation • 161
Send Project Files