Oki 3037 User Manual page 449

3. Hold the hard disk drive by the locking handle (1), then insert
the handle locating lugs (2) and four locating feet (3) into the
holes in the main board making sure the hard disk connector (4)
starts to engage with the socket on the control board.
4. Gently push down on the locking handle (1) making sure the
hard disk moves forward and fully engages with the socket.
5. Replace the main board and secure it with the two screws.
6. Connect the printer interface cable and power cable, then switch
on the printer.
7. Print a MenuMap (see "Printing the MenuMap" on page 44) and
check that the HDD appears at the top of the MenuMap. If it
doesn't, pull the main board back out and reseat the HDD.
hard disk install.eps
ES 3037/3037e Accessories • 449