Oki 3037 User Manual page 70

Item
ZERO
CHARACTER
LINE PITCH
WHITE PAGE
SKIP
CR FUNCTION
LINE LENGTH
FORM LENGTH
TOF POSITION
LEFT MARGIN
FIT TO LETTER
TEXT HEIGHT
CONT PAPER
MODE
FX emulation (continued)
The default settings are bold.
Value
Normal; Slashed
6 LPI; 8 LPI
OFF; ON
CR; CR+LF
80 COLUMN; 136 COLUMN
11 inch; 11.7 inch;
12 inch
0.0 to 1.0 inch in 0.01-inch
increments
0.0 to 1.0 inch in 0.01-inch
increments
Disable; Enable
Same; Diff
Off; On
ES 3037/3037e Setting up • 70
Description
Sets the zero to be slashed or
unslashed.
Specifies the line spacing.
Specifies whether or not the printer
ejects a blank sheet.
Not available with duplex operation.
Sets functionality on receipt of CR
code.
Specifies the number of characters
per line.
Specifies the length of paper.
Specifies the distance of print from
the top edge of the paper.
Specifies the distance of print from
the left hand edge of the paper.
Sets the printing mode that can fit
print data, equivalent to 11 inches
(66 lines), in the LETTER-size
printable area.
Sets the height of a character.
SAME: Regardless of CPI, same
height.
DIFF: As CPI, character heights
vary.
Sets edit direction of paper to
landscape.