Download Print this page

Hardware Specifications; Software Specifications - ATTO Technology ATTO ExpressPCI FC 3342 Specification Sheet

Quad-channel, 2-gigabit fibre channel connectivity, featuring a pci-x interface, for high-performance applications and port density
Hide thumbs Also See for ATTO ExpressPCI FC 3342:

Advertisement

Hardware Specifications

Fibre Channel Interface:
• 2.125-Gigabit data-transfer rates on each channel
• 400 MB/sec. per channel throughput in
full-duplex mode
• Auto negotiation between 2-Gigabit and
1-Gigabit speeds
• Short-wave optical LC SFP pluggable
connectors
• Supports all Fibre Channel topologies
• Point-to-Point
• Arbitrated Loop
• Direct Fabric/Switch Attach
• Flash ROM for easy field upgrades
• Supports the following ANSI Fibre Channel
standards:
- FC-PH, FC-AL2, FC-FCP, FC-PLDA, FC-FLA,
FCA-IP, IETF-IPFC, FC-Tape
• Simultaneous multi-protocol support
Advanced FC Features:
• Support for SNIA HBA API
• Supports Target and Initiator Modes
Advanced SCSI-FCP Support:
• Large command FIFO
• Asynchronous I/O support
• ASPI compatible
• Support for multiple block sizes
Accelerated PCI Bus Management:
• 64/133 PCI-X system bus interface
providing up to 1 GB/sec. aggregate
bandwidth
• Supports PCI 2.2 and 99 specifications
• Supports PCI-X 1.0 specifications

Software Specifications

Driver Support:
• Windows® 2000
• Windows XP
• Windows Server 2003
• Linux
Advanced Data Streaming (ADS™):
• Improved PCI system bandwidth use
• Optimized FC and SCSI-3 algorithms
• RISC processor for high performance
• Supports SCSI-3 tagged command queuing
F i b r e
©2003 ATTO Technology, Inc. Specifications subject to change without notice.
ATTO ExpressPCI FC 3342
Environmental & Physical
Characteristics
Dimensions:
• Full form factor: 4.2" X 6.875"
Operating Environment:
• Temperature:
0-45º C
• Humidity:
10-90% non-condensing
Power:
1.2 Amp @ 3.3 Volts (max)
4.0 Amp @ 5 Volts
PCI Signal Compatibility:
3.3 Volts only
Airflow:
100 LFM (min.)
Fibre Channel Host Adapter
Selection Chart
PRODUCT FEATURES
Number of FC Channels
Maximum Transfer Rate (MB/sec.)
32-bit PCI Compatible
64-bit PCI Compatible
Fabric & Loop Support
Cable Distances
33 MHz PCI Compatible
66 MHz PCI Compatible
PCI-X Compatible
Optical/Copper Interface
Class
Full-duplex
RAID Support
Windows® 2000/XP/Server 2003
Solaris, Linux
Mac® OS and Mac OS X Support
* per channel
C h a n n e l
Configuration:
• Easy to install connection plate with LEDs
to monitor link, on-line and fault status for
each channel
Multi-Channel
2-Gigabit Adapters
FC 3342 FC 3322 FC 3321 FC 3300 FC 3305
4
2
2
400*
400*
400*
500M
500m
500m
500m
133MHz 133MHz
66MHz 66MHz
SW LC SFP SW LC SFP SW LC SFF Fixed SW LC HSSDC
2,3
2,3
2,3
Linux
Linux
OS X
2-Gigabit
Adapters
1
1
400
400
10m
2,3
2,3

Advertisement

loading