Suunto TRAVERSE 1.0 User Manual page 62

NOTE: Power off is a low power state. Follow the normal
startup procedure to wake up the device. All settings except time
and date are maintained. Just confirm them through the startup
wizard.
NOTE: The watch switches to power saving mode when it is
static for 10 minutes. The watch re-activates when moved.
NOTE: Service menu content is subject to change without notice
during updates.
Resetting GPS
In case the GPS unit cannot find a signal, you can reset GPS data in
the service menu.
To reset GPS:
1. In the service menu, scroll to ACTION with [LIGHT] and enter
with [NEXT].
2. Press [LIGHT] to scroll to GPS reset and enter with [NEXT].
3. Press [START] to confirm GPS reset, or press [LIGHT] to cancel.
NOTE: Resetting GPS resets GPS data and compass calibration
values. Saved logs are not removed.
62