Fusedalti - Suunto TRAVERSE 1.0 User Manual

To invert the display in the watch settings:
1. Keep [NEXT] pressed to enter the options menu.
2. Press [NEXT] to enter the GENERAL settings.
3. Press [NEXT] to enter Tones/display.
4. Scroll to Invert display with [START] and invert with [NEXT].

3.9 FusedAlti

TM
FusedAlti provides an altitude reading that is a combination of
GPS and barometric altitude. It minimizes the effect of temporary
and offset errors in the final altitude reading.
NOTE: By default, altitude is measured with FusedAlti during
recordings that use GPS and during navigation. When GPS is
switched off, altitude is measured with the barometric sensor.
If you do not want to use FusedAlti in altitude measurement, set
your reference value with altitude or sea level pressure.
You can search for a new reference value with FusedAlti by
activating it in the options menu under ALTI-BARO » Reference »
FusedAlti.
In good conditions it takes 4-12 minutes for FusedAlti to find a
reference value. During that time, Suunto Traverse shows
barometric altitude with '~' before the reading to indicate that the
altitude may not be correct.
31