Button Lock - Suunto TRAVERSE 1.0 User Manual

You can adjust the backlight brightness (in percent), either in the
watch settings under Tones/display » Backlight or in Movescount.
TIP: When the [BACK LAP] and [START] buttons are locked, you
can still activate the backlight by pressing [LIGHT].
Flashlight
In addition to normal backlight modes, Traverse has one additional
mode where the backlight is automatically set to maximum
brightness and can be used as a flashlight. To activate the flashlight,
keep [LIGHT] pressed.
The flashlight stays on four about four minutes. You can turn it off
at any time by pressing [LIGHT] or [BACK LAP].

3.5 Button lock

Keeping [BACK LAP] pressed locks and unlocks buttons.
23