Setting Bearing Lock - Suunto TRAVERSE 1.0 User Manual

need to turn the declination correction off by setting the
declination value to 0 degrees.
To set the declination value:
1. Keep [NEXT] pressed to enter the options menu.
2. Scroll to NAVIGATION with [START] and enter with [NEXT].
3. Scroll to Settings with [LIGHT] and select with [NEXT].
4. Scroll to Compass with [LIGHT] and select with [NEXT].
5. Scroll to Declination with [LIGHT] and select with [NEXT].
6. Turn the declination off by selecting --, or select W (west) or E
(east). Set the declination value with [START] or [LIGHT].
Declination Declination Declination
-- 0.0° E 0.0° E 0.0°
7. Press [NEXT] to accept the setting.
TIP: You can also access the navigation menu and compass
settings by pressing [START] while navigating.

3.6.3 Setting bearing lock

You can mark the direction to your target in relation to North with
the bearing lock feature.
To lock a bearing:
27