Connect Audio From Other Device; Connections; Digital Audio; Line-In Cable - Sanyo FWSB426F Owner's Manual

Supplied Cables used in this Connection are as follows:
• Digital Audio Optical Cable×1
• Line-In cable × 1
1 Connect to a device
Connect to TV
Rear of Soundbar
COAX
LINE
OPTICAL
Most modern digital TV's do not have Red and White Coaxial Analog Audio Outputs, but do have Red and White Coaxial
Analog Audio Inputs. If you plan to use Red and White Analog Coaxial Cables to Connect your TV to this Soundbar, please
ensure that your TV does indeed have Red and White Coaxial Analog Audio OUT. Refer to your TV's User Manual for details.
To Connect Soundbar directly to other devices (Blu-ray player, Game System, etc.), see your Device's User Manual.

Connect Audio from other Device

Rear of Soundbar
OPTICAL
Digital Audio Optical cable
supplied
NOTE(S)
• Make sure the Soundbar is Turned Off when Connecting Cables.
• Check whether all Connection Cables are properly connected.
• If you Connect from the Headphone Output on the Device's Source to the Line-Input on the Soundbar, make sure the
Volume from the Headphone Output on the Device's Source is set to an appropriate mid-level sound. Setting it too
Low will produce weak output from the Soundbar or setting it too High could cause distortion.
• If a Line / Optical / AUX Connection fails when connected to a TV, check the Audio settings on the devices.
EN

CONNECTIONS

AUX

Line-In cable

supplied
Digital Audio Coaxial cable
(not supplied)
Digital Audio Optical cable
supplied
AUX
Audio cable
(not supplied)
LINE
Line-In cable
HEADPHONE
supplied
Good
Good
HEADPHONE
or
Better

DIGITAL AUDIO

Better
OUT (COAXIAL)
or
Best
Best
DIGITAL AUDIO
OUT (OPTICAL)
e.g.) MP3 player
DIGITAL AUDIO
OUT (OPTICAL)
– 9 –
Rear of TV
e.g.) Blu-ray player
e.g.) Video game
Continued on next page.
R
AUDIO OUT
L