Experiencing The Surround Sound - Sanyo FWSB426F Owner's Manual

Experiencing the Surround Sound

1
Press on the Remote Control to activate the Surround sound.
• The LEDs blink in a spread manner, from the center (OPTICAL/COAXIAL) to both sides.
Surround status
ON
2
If you want to set Surround sound to Off, press
• The 3 LEDs in the middle (USB, OPTICAL/COAXIAL, AUX) blink twice.
Surround status
OFF
NOTE(S)
• The Default setting is Off.
• This Setting will remain while the Soundbar is in Standby mode.
EN
LED lighting patterns
LINE USB USB OPTICAL/ OPTICAL/ AUX AUX
COAXIAL COAXIAL

LINE LINE USB USB OPTICAL/ O OPTICAL L/ AUX AUX
C COAXIAL COAXIAL L

LINE LINE USB USB O OPTICAL/ AUX AUX
C COAXIAL
LED lighting patterns
LINE LINE USB USB OPTICAL O OPTICAL/ L/ AUX AUX
COAXIAL C COAXIAL L
Sound effects
PAIR
PAIR PAIR
Outputs high realistic sounds.
PAIR PAIR
on the Remote Control once again.
Sound effects
PAIR PAIR
Outputs the original sound.
– 13 –