Sanyo FWSB426F Owner's Manual page 16

The following chart describes behavior of the
of the PAIR indicator.
PAIR indicator behavior
(The arrow indicates the passage of time.)
1
2
3
4
5
This Soundbar's name is "SANYO_FWSB426F". If this Soundbar has already been registered to a Bluetooth compatible
*1
Device and the connection fails, delete it (or deactivate it), then press
To play music from a different Bluetooth compatible Device, press
*2
Bluetooth compatible Device to connect
NOTE(S)
• If reconnecting the Bluetooth compatible device to the Soundbar fails, delete the registered profile of this Soundbar
from the Bluetooth compatible device, then perform pairing again.
This unit can store up to 9 device profiles.
• The music streaming may be interrupted by obstacles between the device and Soundbar, such as wall, metallic
casing that covers the device, or other devices nearby that operate in the same frequency.
• If you want to connect your Soundbar with another Bluetooth compatible device, press
current connection.
• Depending on your Bluetooth compatible device, different behaviors may appear. See your Bluetooth compatible
device's User Manual for details.
• The operational range between the Soundbar and a Bluetooth compatible device is approximately 30 feet (10m), if
there is no interference or obstacles.
EN
PAIR indicator and To-Do's for playback, according to each behavior sequence
Waiting for a new Bluetooth compatible Device to connect (Status:
Blinks twice 
Pairing). On the Bluetooth compatible Device to connect, select the
Light off  Repeats
Soundbar's name
A Bluetooth compatible Device is connected.
Remains lit Music can be played from the connected Bluetooth compatible
Device
No Bluetooth compatible Device is connected. To reconnect with
Blinks slowly
the last connected Bluetooth compatible Device, press
BLUETOOTH
Trying to connect with the last connected Bluetooth compatible
Blinks rapidly
Device. Enable Bluetooth on the last connected Bluetooth
compatible Device and wait a moment
Either another audio input is selected or the Soundbar is in Standby.
If all indicators are Off, press
Remains unlit
all indicators except the blue LED are lighting up or blinking, press
light up. Follow 1-4 in this chart.
(*1) .
The current status of Bluetooth and the procedures to
complete Bluetooth connection for Bluetooth playback.
, then connect.
(*1)
.
(*2)
.
(*2)
BLUETOOTH. The (Bluetooth) indicator will start blinking or
PAIR
and select this Sound bar's name to connect.
PAIR , then select this Soundbar's name on the
– 16 –
.
(*2)
to turn On the Soundbar. When
PAIR to disconnect the