Furuno FM-8900S Operator's Manual page 79

2. Rotate the CHANNEL/ENTER knob to select [MSG FILE] then push the knob.
Key/knob
CHANNEL/ • Move the cursor by rotating the CHANNEL/ENTER knob.
ENTER • Open the detailed information screen for the selected message file by
pushing the CHANNEL/ENTER knob (see the following "Detailed in-
formation screen for message files").
CANCEL Return to the [MENU] screen.
OTHER Open the [COMPOSE MESSAGE] screen to create a DSC message with
DSC MSG registered message (see paragraph 5.13.5).
1 Go to the previous page.
3 Go to the next page.
4 Delete messages (see paragraph 5.14.8).
5 Open the [MESSAGE FILE ENTRY] screen.
6 Switch the message type. Each press changes the type continuously
([INDIVIDUAL] → [GROUP] → [PSTN] → [TEST] → [INDIVIDUAL] → ...).
Detailed information screen for message files
Rotate the CHANNEL/ENTER
knob to select the message file
desired on the [MESSAGE
FILE] list then push the knob.
The detailed information screen
for the selected message file
appears. The right figure shows
the screen for an individual
message.
Several functions can be done
from this screen.
• Rotating the CHANNEL/ENTER knob: Go to the detailed information screen for the
previous or next message file.
• Pushing the CHANNEL/ENTER knob: Open the [MESSAGE FILE EDIT] screen
(see paragraph 5.14.6).
• OTHER DSC MSG key: Open the [COMPOSE MESSAGE] screen (see
paragraph 5.14.7).
5. MENU OPERATION
When 100 messages
have been registered,
this is grayed out.
Function
5-13