Furuno FM-8900S Operator's Manual page 128

APPENDIX 7 THERMAL PRINTER UTP-58E
UTP-58E for RC-8900 (Rack Console) and PP-8800A (Printer)
Press the power switch and the power lamp goes on. When the lamp is on, the data received from
the radiotelephone is printed. After completion of printing, feed paper out by pressing the line feed
button.
Paper replacement
1. Press the paper cover open button to open the
paper cover.
2. Load the roll paper shown in the right figure.
3. Set the roll paper so that the end of the paper is
outside the printer, and then close the cover by
pressing both sides of the top of the paper cover.
AP-26
Paper cover
open button
Power lamp
1
3
Line feed
button
Power
switch
2
3