Group Call; How To Send A Group Call - Furuno FM-8900S Operator's Manual

4. DSC GENERAL MESSAGE CALLING, RECEIVING
3. Rotate the CHANNEL/ENTER knob to select the reason for unable then push
the knob.
4. With [GO TO CALL] selected, push the CHANNEL/ENTER knob to send un-
able acknowledge call.
• How to send able acknowledge call and change channel
1. Rotate the CHANNEL/ENTER knob to select [PROPOSE] in the user options
area then push the knob.
2. With [COMM CH] selected, push the CHANNEL/ENTER knob.
3. Rotate the CHANNEL/ENTER knob to select [SELECT] or [MANUAL] then
push the knob.
[SELECT]: The options window appears. Rotate the CHANNEL/ENTER knob
to select a channel then push the knob.
[MANUAL]: Enter a channel then push the CHANNEL/ENTER knob.
4. With [GO TO CALL] selected, push the CHANNEL/ENTER knob to send the
able to change channel acknowledge call.
5. Communicate by radiotelephone.
6. After you have completed communications, rotate the CHANNEL/ENTER knob
to select [QUIT] in the user options area then push the knob.
4.2

Group Call

A group call is for calling a specific group by specifying its group MMSI. When you set
the group call in the address book, the group MMSI is automatically stored as your
ship's group MMSI.
4.2.1

How to send a group call

1. Press the OTHER DSC MSG key.
4-6
[ SELECT AN ACK ]
INDIVIDUAL MSG
MSG TYPE : INDIVIDUAL ACK
TO : 123456789
PRIORITY : ROUTINE
COMM MODE : TELEPHONE
COMM CH : 01
ELAPSED T I ME : 00H01M15S