Windows Nt4.0/2000; Windows 95/98; Windows 3.1 - Oki ii User Manual

Windows NT4.0/2000

Recommended procedure:
1. Install printer driver.
2. Install network card utility.
3. Configure network card.
When printing from Windows NT4.0/2000 please use LPR (Microsoft
TCP/IP Printing) included in Windows NT4.0/2000 Add the LPR port as
the driver output port and assign it the IP Address configured for network
card. For details, see the utilities manual in CD-ROM.
TCP/IP should be added to Windows NT4.0/2000 because it is used for
LPR.
Note: A warning message may be received about authentification
while installing the driver on Windows2000. Please ignore this
message if it appears, as it will not cause any problem with the
installation of the driver.

Windows 95/98

Recommended procedure:
1. Install printer driver.
2. Install network card utility.
3. Install LPR utility.
4. Configure network card.
When printing directly from Windows 95/98, the LPR utility should be
installed from the supplied CD-ROM. For details see the utilities manual
in CD-ROM.
TCP/IP must be installed in Windows 95/98 in order to use LPR.

Windows 3.1

Recommended procedure:
1. Install printer driver.
2. Run SETUP.EXE from the Win31 directory on the supplied CD-
ROM.
32 Internet Fax and Network Print/Network Scanner