Scanner Unit Operating Information; Access Control; Logging In - Oki ES 3640e MFP User Manual

Scanner unit operating information

Access control

If your Administrator has enabled access control on your scanner,
it will automatically start up in access control mode. You will not
be able to use it until you have provided a valid PIN and logged
in. After using it, you will be expected to log out, leaving the
scanner unit in access control mode, unable to be used by
unauthorised users.
NOTE
The PIN is associated with using the Job Accounting Utility and
is the last four digits of the ID used for Job Accounting.

Logging in

1. At the access control screen, use the numeric keys on the
scanner unit to enter your PIN.
ES3640e MFP User's Guide
Scanner unit operating information > 56
1