Table of Contents
Advertisement
Quick Links
8862H-English_Manuals 3/19/15 3:30 PM Page 1
Self-Leveling Two, Three or Five-Beam Laser Dot
Model No. 40-6692, 40-6693 & 40-6695
Instruction Manual
Congratulations on your choice of this Self-Leveling Two,Three or
Five-Beam Laser Dot. We suggest you read this instruction manual
thoroughly before using the laser. Save this instruction manual for
future use.
These lasers either emit two, three or five laser beams, which projects a
series of visible points on surfaces around the product: 40-6695 (left, right,
front, up, down) 40-6693 (front, up and down) and 40-6692 (up and down).
Beam visibility depends upon lighting conditions in the work area.
This is a Class IIIa laser tool and is manufactured to comply with CFR 21,
parts 1040 .10 and 1040 .11 as well as international safety rule IEC 285.
©2015 Johnson Level & Tool
1
Advertisement
Table of Contents
Related Manuals for Johnson 40-6692
Summary of Contents for Johnson 40-6692
- Page 1 These lasers either emit two, three or five laser beams, which projects a series of visible points on surfaces around the product: 40-6695 (left, right, front, up, down) 40-6693 (front, up and down) and 40-6692 (up and down). Beam visibility depends upon lighting conditions in the work area.
-
Page 2: Table Of Contents
Self-Leveling Two, Three or Five-Beam Laser Dot Multi-Functional Magnetic Base Mounting Strap “AA” Alkaline Batteries Magnetic Floor Target (not included in 40-6692) Instruction Manual with Warranty Card Soft-Sided Pouch and Hard-Shell Carrying Case 2. Features and Functions • Product simultaneously projects two, three, or five laser beams 40-6695 (left, right, front, up and down), 40-6693 (front, up and down) and 40-6692 (up and down). -
Page 3: Safety Instructions
• Do not attempt to repair or disassemble the laser tool. If unqualified persons attempt to repair this tool, warranty will be void. • Use only original Johnson ® parts and accessories purchased from your Johnson ® authorized dealer. Use of non-Johnson ®... -
Page 4: Location/Content
8862H-English_Manuals 3/19/15 3:30 PM Page 4 DANGER! Class IIIa Laser Product Max. Power Output: Wavelength: 625-645nm THIS TOOL EMITS LASER RADIATION. DO NOT STARE INTO BEAM. AVOID DIRECT EYE EXPOSURE. 4. Location/Content of Warning Labels 40-6692 40-6695 40-6693 ©2015 Johnson Level & Tool... -
Page 5: Location Of Parts/Components
On/Off Switch 1/4" Screw Thread Hole Battery Cover Calibration Port Plug Output Window Belt Slot Wall Hang Hole Magnets Laser Attachment Wheel 1/4" Screw to Attach Laser Magnets 1/4" and 5/8" Screw to Attach to Tripod ©2015 Johnson Level & Tool... -
Page 6: Operating Instructions
Screw the battery cover shut. Turn the on/off switch to on. If the power LED is flashing, the battery is low. ©2015 Johnson Level & Tool... -
Page 7: Using The Product
Note: Product must be within ± 3° of level for self-leveling feature to function properly. Greater than ± 3° will result in an alarm condition (flashing laser and intermittent beeping sound). Output of laser line: 40-6692 40-6693 40-6695 Left Right Front Front Down Down Down ©2015 Johnson Level & Tool... - Page 8 4. Rare earth magnets located on base allows the base to attach to metal surfaces. Wall 5. The laser can be attached to a wall with a Hang nail/screw using the wall hang hole. Hole ©2015 Johnson Level & Tool...
-
Page 9: Self-Check & Fine Calibration
5. Turn the unit 90°again (as shown in figure 1-4) and repeat step 3. Mark the center of the plumb-up point as “D”. 6. Marks A-D should all be in the same spot. If not, the unit will need to be recalibrated. Please see calibration adjustment information. ©2015 Johnson Level & Tool... - Page 10 A & C and points B & D are less than 1/16", your instrument is within its tolerance. 10. If it is greater than 1/16", your unit 48 ft. will need to be recalibrated. (14.6m) Fig 2 ©2015 Johnson Level & Tool...
- Page 11 6. For adjustment to the plumb beam, turn the Side (Figure H) calibration screw clockwise to move the plumb beam away from you and counter- clockwise to move the beam toward you. Back Port Rubber Plug Fig. I Side Port Plastic Plug Fig. H ©2015 Johnson Level & Tool...
-
Page 12: Technical Specifications
5.00" x 1.97" x 5.75" (127 x 51 x 146mm) Weight 1.43 lbs. (0.65 Kg) Working Temperature 14°F to 113°F (-10°C to +45°C) Center Screw Thread 1/4" - 20 and 5/8" - 11 IP Protection Class ©2015 Johnson Level & Tool... -
Page 13: Application Demonstrations
8862H-English_Manuals 3/19/15 3:30 PM Page 13 10. Application Demonstrations Plumb reference for lamp installation Reference for fence installation Reference for pipeline installation Reference for dormer installation Reference for door frame installation Reference for construction cubic partition Reference for vertical partition ©2015 Johnson Level & Tool... -
Page 14: Care And Handling
12. Product Warranty Johnson Level & Tool offers a three year limited warranty on each of its products. You can obtain a copy of the limited warranty for a Johnson Level & Tool product by contacting Johnson Level & Tool's Customer Service Department, as provided below, or by visiting our web site at www.johnsonlevel.com. -
Page 15: Warranty Registration
For further assistance, or if you experience problems with this product that are not addressed in this instruction manual, please contact our Customer Service Dept. In the U.S., contact Johnson Level & Tool’s Customer Service Department at 888-9-LEVELS. In Canada, contact Johnson Level & Tool’s Customer Service Department at 800-346-6682. -
Page 16: Accessories
NO WARRANTY. If you need any assistance in locating any accessories, please contact our Customer Service Department. In the U.S., contact Johnson Level & Tool’s Customer Service Department at 888-9-LEVELS. In Canada, contact Johnson Level & Tool’s Customer Service Department at 800-346-6682. -
Page 17: Trouble Shooting
• If the laser is out of calibration more than 1/2"/50' contact an authorized Johnson Service Center or Johnson Level & Tool's Customer Service Department. • If the laser beeps and flashes constantly, place the laser on a surface that is within the self-leveling range. - Page 18 8862H-English_Manuals 3/19/15 3:30 PM Page 18 ©2015 Johnson Level & Tool...
Need help?
Do you have a question about the 40-6692 and is the answer not in the manual?
Questions and answers