Energy Saver - Vision S7100hrt Owner's Manual

SYNCING CONSOLE WITH PASSPORT
1. Use the arrow keys on the Passport remote to scroll to the setup icon
and press select.
2. Follow the on-screen prompt to press and hold INCLINE
RESISTANCE
3. The message displayed on screen will notify you if the sync was a
success or failure.
NOTE: See Passport Owner's Manual for more information.
ENERGY SAVER (STANDBY MODE)
This machine has a special feature called Energy Saver™ mode. This mode is
NOT automatically activated. When Energy Saver mode is activated, the display
will automatically enter standby mode (Energy Saver mode) after 15 minutes
of inactivity. This feature saves energy by disabling most power to the machine
until a key is pressed on the console. This feature can be turned on or off in the
engineering menu.
To enter the engineering menu, press and hold the
keys for 3-5 seconds. Use the
Press ENTER to select. Use the
Press and hold START for 3-5 seconds to exit.
on the console.
keys to navigate through the menu to P18.
keys to select ENRGY SVE ON or OFF.
and
and RESISTANCE
27