Page 1
IM2016 02/2013 Rev. 06 INVERTEC PC208 & PC210 OPERATOR’S MANUAL ENGLISH Lincoln Electric Bester Sp. z o.o. ul. Jana III Sobieskiego 19A, 58-263 Bielawa, Poland www.lincolnelectric.eu...
EN 60529, EN 60974-1, EN 60974-7, EN 60974-10 (15.02.2013) Paweł Lipiński Operations Director Lincoln Electric Bester Sp. z o.o., ul. Jana III Sobieskiego 19A, 58-263 Bielawa, Poland 07/11 English English...
12/05 THANKS! For having choosen the QUALITY of the Lincoln Electric products. Please Examine Package and Equipment for Damage. Claims for material damaged in shipment must be notified immediately to the dealer. For future reference record in the table below your equipment identification information. Model Name, Code &...
Failure to follow the instructions in this manual could cause serious personal injury, loss of life, or damage to this equipment. Read and understand the following explanations of the warning symbols. Lincoln Electric is not responsible for damages caused by improper installation, improper care or abnormal operation.
The plasma arc can cause injury and burns. Keep your body away from nozzle and plasma arc. Turn off power before disassembling torch. Do not grip material near cutting path. Wear complete body protection. Electric shock from torch or wiring can kill. Wear dry insulating gloves.
When the thermal LED turns off, normal Controls and Operational Features operation is again possible. INVERTEC PC208 front command panel. Blink Mains undervoltage or overvoltage error: the machine is disabled. The PC208 machine front panel has a lower quantity of...
Page 7
PC208: recommended to contact the nearest technical service The torch button enables the built-in compressor center or Lincoln Electric. Maintenance or repairs that provide the air flow to the torch. Releasing the performed by unauthorized service centers or personnel torch button the cutting process is stopped, but the will null and void the manufacturers warranty.
Lincoln Electric. The Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low-voltage supply system.
Before installing the machine, the operator must check the work area for any devices that may malfunction because of electromagnetic disturbances. Consider the following. Input and output cables, control cables, and telephone cables that are in or adjacent to the work area and the machine.
12/05 Part List reading instructions Do not use this part list for a machine if its code number is not listed. Contact the Lincoln Electric Service Department for any code number not listed. Use the illustration of assembly page and the table below to determine where the part is located for your particular code machine.