Configuring The Nvr - D-Link Mydlink DNR-322L User Manual

Section 3 - Configuration

Configuring the NVR

BASIC OPERATION
You may run the wizard to configure the setup for your NVR. There are basic and advanced operations. You must first configure
the basic operations in order to activate and utilize the features of our NVR.
Step 1: Camera Search - Search for a network camera using UPnP and add it to the NVR camera list.
Step 2: Recording Schedule - Configure a camera for recording and create a detailed schedule. Users can also simply choose
Always Record and select connected cameras.
After completing the above settings, the NVR will be fully functional.
ADVANCED OPERATION
E-mail Setup
Step 1: - Configure the E-mail address and
messages for event notification.
Event Setup
Step 2: - Configure event options with
various combinations. Events can be triggered in the
event of camera motion detection or full hard disk
warning. An event action can be configured to send
E-mail.
D-Link DNR-322L User Manual 32