Table of Contents
Advertisement
Available languages
Available languages
Before You Begin
This installation guide provides basic instructions
for installing the DAP-3711 on your network. For
additional information about how to use the
access point, please see the User Manual from
the D-Link support website.
Package Contents
This DAP-3711 should include the following
items:
•
5km Long Range 802.11ac Wireless Bridge
•
PoE injector
•
Power cord
•
Mounting ties
•
Quick Start Guide
If any of the above items are damaged or
missing, please contact your local D-Link reseller.
Note: Using a power supply with a different
voltage than the one recommended for the
device will cause damage and void the warranty
for this product.
System Requirements
•
Microsoft Windows®, or a Linux-based
operating system
•
An available Ethernet port
•
Microsoft Edge, Firefox 60.0, or Chrome
68.0.3440.106
Quick Installation Guide
Hardware Overview
LED Indicators
1
Figure 1: DAP-3711 LEDs
#
LED
Power indicator. Green light indicates
1
Power
the power is on.
Network connection light. A steady
green light indicates the LAN port of
the PoE power supply is connected
2
LAN
to a network device. A flashing
green light indicates data is being
transmitted.
Wireless indicator. Lights up to
3
WLAN
indicate wireless activation. Flashes
when data is being transmitted.
Signal strength indicator. A red light
indicates a weak signal. Red and
Signal
4
yellow together indicates a medium
Strength
signal. Yellow, red and green together
indicates a strong signal.
Table 1: LED Descriptions
2
3
4
Description
2
Advertisement
Table of Contents
