Railsounds In The Command Environment; Cab-1 Numeric Keypad Commands For Your Locomotive - Lionel Building Set Owner's Manual

TrainMaster Command operations

RailSounds in the Command environment

Y our locomotive's RailSounds system
gives you even more in the
TrainMaster Command environment.
• DynaChuff TM . Real steam locomotive
chuffing depends on the locomotive's load.
DynaChuff simulates both labored and
relaxed chuffing sounds. Highball down the
mainline and hear the labored chuffing of a
locomotive battling inertia. Reduce your
throttle setting, and chuffing relaxes to a

CAB-1 numeric keypad commands for your locomotive

W hen you press AUX1 on CAB-1,
you turn the numeric key-
pad into 10 command buttons.
The keypad "stays open" and gives
you access to extra command fea-
tures until you press any top-row
button (SW, ACC, RTE, TR, or
0 Stops and resets the locomotive to FOR-
WARD. Headlight flickers.
1 Raises the volume of RailSounds.
Sound volume increases.
™
is the sound of unintelligi-
2 CrewTalk
ble walkie-talkie communication.
3
Starts up RailSounds. Start-up
sequence commences. Steam
blowoff sound.
4 Lowers the volume of RailSounds.
Sound volume decreases.
5 Activates the RailSounds steam shut-
down sequence. Just like the real thing,
your locomotive must be idle for shut-
down to occur. Steam shutdown com-
mences. Remember, the whistle and bell
will not sound until you restart RailSounds.
CrewTalk sounds.
more sedate sound, as though the load placed
on the locomotive has decreased. Experience
DynaChuff on steep grades, at yard crawls,
and at speed. Another RailSounds exclusive.
• Bonus sounds like squealing brakes
with the CAB-1 BRAKE command.
• Incidental sounds you control with
CAB-1 numeric keypad commands, like
steam let-off and steam release effects.
ENG). The CAB-1 keypad overlay
included with your locomotive is
designed to help you learn the
auxiliary features specific to this
classic locomotive.
Locomotive RailSounds
effects in bold italic.
6 Steam release sound.
7 TowerCom
ment that includes that engine's road
number and/or name. There is a four sec-
ond delay in this function.
8 Turns off the smoke generator.
Steam release sound*.
9 Turns on the smoke generator. Press and
hold 9 (10 seconds maximum) to initi-
ate Smoke Boost
generator and enhances smoke output when
you start running your locomotive. Steam
release sound*.
*Hearing the steam release sound lets you know
that the locomotive has received these commands.
AUX 1-9 only works if the smoke
Note!
unit switch is in the ON position.
12
is an audible announce-
™
™ —it superheats the smoke