Table of Contents
Advertisement
I/O Specification
● Signal Specification
- Line0 (GPIO Input, I/O connector : 4 pin)
Input Circuit
Level
Polarity
Pulse Width
Input circuit diagram
Notes of external trigger signal:
Depending on cable length, cable kinds and input current of trigger input line, Random Trigger Shutter operation may not
satisfy timing specification or camera may not receive EXT_TRIG signal. Please confirm it before use.
Notes of input level:
Line0 and Line2 have different input level. Please use input level within the voltage described in this specification.
Copyright © 2016 TOSHIBA TELI CORPORATION, All rights reserved.
: LVTTL
: Low 0 ~ 0.5V, High 2.0 ~ 24.0V
: High active / Low active (initial factory setting: Low active)
: Minimum 50μs
Inside
DC3.3V
10kΩ
0V
21 / 81
http://www.toshiba-teli.co.jp/en/index.htm
D4253386A
Advertisement
Table of Contents
