Exposuretime - Toshiba BU302MG Instruction Manual

ExposureTime

BU series is able to adjust exposure time by using electric shutter control.
BU USB series provides two kinds of exposure time control mode.
: The exposure time is determined by "ExposureTime" register setting value.
- Manual
: The exposure time is determined by "AcquisitionFrameRate" register setting value
- NoSpecify
● Registers
Register Visibility
ExposureTimeControl Beginner
ExposureTime Beginner
● Setting
- Select exposure time control mode
Set the "ExposureTimeControl" register to "Manual".
Set the following value to "ExposureTime" register. Setting value is Float type.
AcquisitionFrameRateControl
NoSpecify
Manual (*)
● Note
Copyright © 2016 TOSHIBA TELI CORPORATION, All rights reserved.
Access
R/W Selects exposure time control mode.
R/W Sets absolute exposure time.
The frame rate is determined by giving priority to AcquisitionFrameRate setting value.
The frame rate is determined by giving priority to ExposureTime setting value.
Model
ExposureTime (*)
ExposureTimeMin
ExposureTimeMax
Description
Function
BU302MG BU505MG
8000 [μs] 13000 [μs]
30 [μs]
16000000 [μs] 16000000 [μs]
* initial factory setting
53 / 81
http://www.toshiba-teli.co.jp/en/index.htm
* initial factory setting
30 [μs]
D4253386A