Table of Contents
Advertisement
● Setting
- Select an image format.
Select "Fomat0" of "ImageFormatSelector" register.
- Set image size and image start position
Set the following value to "Width", "Height", "OffsetX", "OffsetY" registers. Setting value is Integer type.
"Width", "Height" registers are image size setting. "OffsetX", "OffsetY" registers are image start position
setting.
● Note
Changing "Width", "Height", "OffsetX", "OffsetY" register value is invalid during image stream data output.
Copyright © 2016 TOSHIBA TELI CORPORATION, All rights reserved.
Model
Width/OffsetX unit size
Height/OffsetY unit size
Minimum unit size
Maximum unit size (*)
36 / 81
BU302MG
BU505MG
4
4
2
2
64 x 64
64 x 64
2048 x 1536
2448 x 2048
* initial factory setting
http://www.toshiba-teli.co.jp/en/index.htm
D4253386A
Advertisement
Table of Contents
