8.3. Device Setup
In this menu you can configure all devices that can be connected to the DVR, like cameras, monitors and
keyboards.
Caution: NTSC and PAL cameras cannot be used at the same time.
If changing the camera type from NTSC to PAL, the system should be rebooted.
8.3.1. Camera Setup
Select the camera you want to configure, by selecting its channel.
Name:
Fill in the name the camera should have. This name will be shown on the monitor and will be also shown in
the GRUNDIG Control Center Software.
When pressing the [Enter] button or clicking the mouse, you can enter the camera name in the text menu.
English
52