Technicolor TG582n Quick Setup Manual page 17

3. Click on the name of your wifi network which should be written
in Blue.
4. Click on Configure in the top right hand corner of the page.
5. Change Channel Selection from Automatic to Manual.
6. Select another channel to the one shown in Channel. First try
channels 1, 6 or 11.
7. Click Apply to confirm the change. Then wait 60 - 120 seconds
for your computer to automatically pick up the new settings and
reconnect to your wifi network. IF there is no improvement, try the
remaining channels 2-5 or 7-10 periodically until best performance
is achieved.
TG582n Quick Set Up Guide
17