Managing Files From The Bootware Menu - HP A-MSR20 Release Notes

Figure 8 File transfer progress
When the Serial submenu appears after the file transfer is complete, enter 0 at the prompt to
13.
return to the BootWare menu.
Download successfully!
31911808 bytes downloaded!
Input the File Name:main.bin
Updating File flash:/main.bin..............................................
.....................................................Done!
===========================<Enter Serial SubMenu>===========================
|Note:the operating device is flash
|<1> Download Application Program To SDRAM And Run
|<2> Update Main Application File
|<3> Update Backup Application File
|<4> Update Secure Application File
|<5> Modify Serial Interface Parameter
|<0> Exit To Main Menu
============================================================================
Enter your choice(0-5):
Enter 1 in the BootWare menu to boot the system.
14.
If you are using a download rate other than 9600 bps, change the baud rate of the
15.
terminal to 9600 bps. If the baud rate has been set to 9600 bps, skip this step.

Managing files from the BootWare menu

To change the type of a system software image, retrieve files, or delete files, enter 4 in the
BootWare menu.
The File Control submenu appears:
==============================<File CONTROL>==============================
|Note:the operating device is cfa0
|<1> Display All File(s)
31
|
|
|
|
|
|
|
|
|