Table of Contents
Advertisement
|<8> Clear Super Password
|<9> Storage Device Operation
|<0> Reboot
============================================================================
Ctrl+Z: Access EXTEND-ASSISTANT MENU
Ctrl+F: Format File System
Enter your choice(0-9): 8
The router deletes the user privilege level password configuration commands from the
main next-startup configuration file. After the operation is completed, the following
message appears:
Clear Super Password Success!
When the EXTEND-BOOTWARE menu appears again, enter 0 to reboot the router.
10.
The router starts up with the main next-startup configuration file.
Configure new passwords for user privilege levels.
11.
In the following example, the password 123456 is configured for user privilege level 3.
For security, the password is always saved in ciphertext to the configuration file,
regardless of whether you specify the simple keyword or cipher keyword for the super
password command.
<HP> system-view
[HP] super password cipher 123456
To make the setting take effect after a reboot, save the running configuration to the
12.
next-startup configuration file.
[HP] save
Dealing with password loss when password
recovery capability is disabled
Reboot the router to access the EXTEND-BOOTWARE menu, and enter 5.
13.
The current mode is no password recovery.
Note: The current operating device is cfa0
Enter < Storage Device Operation > to select device.
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System
|<2> Enter Serial SubMenu
|<3> Enter Ethernet SubMenu
|<4> File Control
|<5> Restore to Factory Default Configuration
|<6> Skip Current System Configuration
|<7> BootWare Operation Menu
|<8> Clear Super Password
|<9> Storage Device Operation
|<0> Reboot
============================================================================
Ctrl+Z: Access EXTEND-ASSISTANT MENU
Ctrl+F: Format File System
Enter your choice(0-9): 5
41
|
|
|
|
|
|
|
|
|
|
|
|
|
Advertisement
Table of Contents
