Classic Cycles Technical Resources - Honda 2006 RC51 Owner's Manual

If You Have a Flat Tire
Installation
1. Install the side collars and position the
wheel and rear brake bracket.
While installing the wheel, carefully
fit the brake disc between the brake
pads to avoid damaging the pads.
Avoid getting grease, oil, or dirt on
the disc or pad surfaces. Any
contamination can cause poor brake
performance or rapid pad wear after
reassembly.
182
Taking Care of the Unexpected
2.
(8) slot
(9) swingarm

Classic Cycles Technical Resources

Make sure that the slot ( ) on the
swingarm ( ) is located in the lug ( ) 9
on the rear brake bracket.
(8)
8
10
(10)
(9)
(10) lug