Circuit Fuse Access:
10.
Remove the left lower fairing (page
82
).
11.
Open the fuse box cover (
(10)
(8) fuse box cover
12.
To check or replace a circuit fuse, pull
the old fuse out of its retaining clips.
Look for a burned wire inside the fuse.
If the fuse is blown (
a spare fuse (
10
) of the same rating or
lower.
8
).
(8)
(10) spare fuses
9
), replace it with
www.ClassicCycles.org
If a Fuse Blows
CIRCUIT FUSE
(9)
(9) blown fuse
If you do not have a replacement fuse with
the proper rating for the circuit, install one
with a lower rating.
Replacing a f use with one that has a
higher rating greatly increases the chance
of damage to the electrical system.
13.
Close the fuse box cover.
14.
Install the left lower fairing.
Taking Care of the Unexpected
189