Setkey Utility; Character Repeat Rate; Character Repeat Delay - Texas Instruments TravelMate 4000M User Reference Manual

SETKEY Utility

The
typematic rate and the key repeat delay rate. This utility
also sets or displays the current settings for the PS/2 port
(Windows-based units only).
The utility displays the following screen and returns to the
MS-DOS
Usage: SETKEY [/rx /dx /nx /px /S]
/rx char repeat rate, x is:
/dx char repeat delay, x is:

Character Repeat Rate

The character repeat rate, set using the rx code, enables
you to adjust the number of characters per second (cps) the
keyboard generates when you hold down an alphanumeric
key. You can set the rate from 2 cps to 30 cps as shown on
the
10 cps.

Character Repeat Delay

The character repeat delay, set using the dx code, lets you
adjust the time you must hold down a key before the
typematic feature starts. You can set the delay from 0.25 to
1 second as shown on the
default delay value is 0.5 second.
9-10 Other Utilities
utility enables you to set the keyboard
SETKEY
prompt.
v - 30 cps
f - 20 cps
n - 10 cps (default)
s - 5 cps
c - 2 cps
1 - 1 second
2 - .75s
3 - .5s (default)
4 - .25s
command listing. The default repeat rate is
CURSOR
command listing. The
CURSOR
SET KEY Utilit y