Accessing Disk-Based Setup - Texas Instruments TravelMate 4000M User Reference Manual

Accessing the Setup Programs
You should keep your System Recovery diskette updated
with your latest Windows configuration. To do this,
complete the following steps:
1.
The first time you complete a new addition or change to
Windows (such as adding a new software icon),
manually copy all *.GRP and *.INI files to the first copy
of the System Recovery diskette. These files are
located in the C:\Windows directory.
2. The next time you complete a new addition or change to
Windows, you should manually copy over all of the
*.GRP and *.INI files to the second copy of the System
Recovery diskette.
3. After each subsequent change, you should alternate
making the backup of *.GRP and *.INI files to the first
and second copy of the System Recovery diskette.

Accessing Disk-Based Setup

This Setup program, which resides on the hard disk under
the directory, defines all default and most
UTILS
user-selectable parameters. Disk-based Setup contains
four screens, or pages, with onscreen prompts plus a
context-sensitive online help.
From the prompt, you can access Page 1 of disk-based
C:\>
Setup in two ways:
Press FN-ESC (SETUP)
Type SET_UP and press ENTER.
After Setup has loaded, you can define parameters based
on the information in the online help or in this chapter
Using the Setup Programs 1-5
.