Alarm Utility - Texas Instruments TravelMate 4000M User Reference Manual

ALARM Utility

The
low-battery beeper and the cover-closed beeper at the
MS-DOS C
at the
ALARM
and press ENTER. The current status of the
is displayed.
The Cover Alarm is turned On.
The Low Battery Alarm is turned On.
To view a brief help display, type
Alarm /?
and press ENTER. The utility displays the following screen
listing the command options and the current alarm status.
Usage:
Alarm
Alarm /On - Turns the Cover and Low Battery Alarms On.
Alarm /Off - Turns the Cover and Low Battery Alarms Off.
The
the cover-closed alarm beepers.
You also can add either of the commands to your
AUTOEXEC.BAT
computer. For example, add the line
ALARM ON
to your
boot the computer. You can also control one or both alarms
using the computer's Setup Program. (See Chapter 1 of this
manual.)
9-2 Other Utilities
utility enables you to turn on or turn off the
ALARM
:\> prompt. To view the command and its options,
:\> prompt type
MS-DOS C
- Alarm [/switch]
- Shows status of Cover and Low Battery Alarms
utility turns on or turns off the low-battery and
ALARM
file to control the alarms when you boot the
AUTOEXEC.BAT
file to turn on both alarms when you
ALARM Utilit y
utility
ALARM