Other Ways To Select A Predefined Palette; Viewing The Current Palette - Texas Instruments TravelMate 4000M User Reference Manual

PAL Utility
Note: Palettes created or modified with the
are not saved. PAL /S displays the currently selected LCD
pallette.

Other Ways to Select a Predefined Palette

After you define a palette using the
two additional ways to select the defined palette:
Selecting the Palette From the Keyboard — To change the
current palette, press FN-ALT-ESC. Each time you press
FN-ALT-ESC, the display changes to the next palette (P0
through P5). Stop pressing FN-ALT-ESC when the palette
you prefer is displayed.
Including the Palette in the
want the computer to load a particular palette at start up,
include the
example, to start up with user palette 1 loaded, include the
command PAL P4 in your
Note: You also can press FN-ALT-ESC to toggle through
the six available palettes.

Viewing the Current Palette

To view the palette currently in use, type PAL /S at the
MS-DOS prompt and press ENTER.
The current palette is displayed along with the following
statement:
6-4 Palette Utilities
Select the palette from the keyboard
Include the command in your
command in your
PAL
utility, you have
RPAL
AUTOEXEC.BAT
AUTOEXEC.BAT
AUTOEXEC.BAT
file.
AUTOEXEC.BAT
command
PAL
file
file — If you
file. For