Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Iluminarc ILUMIPANEL 24g2 IP
Summary of Contents for Iluminarc ILUMIPANEL 24g2 IP
- Page 1 User Manual...
- Page 2 ILUMINARC® reserves the right to revise this document and to make changes from time to time in the content without obligation of ILUMINARC® to notify any person or company of such revision or changes. ILUMINARC® may issue a revision of this manual or a new edition of it to incorporate such changes.
-
Page 3: Table Of Contents
Table of Contents Table of Contents 1. Introduction .......................... 1 What Is In The Box ..........................1 Unpacking Instructions ........................1 Claims ............................... 1 Text Conventions..........................1 Safety Notes ............................2 Personal Safety ............................2 Mounting and Installation ........................... 2 Power and Wiring ............................ - Page 4 Table of Contents 5. Technical Information ......................15 Product Maintenance ........................15 Product Repairs ..........................15 Photometrics ............................ 16 LED Disclaimer ..........................17 LED Life ..............................17 LED Binning ............................17 Color Rendering Index (CRI) ........................17 Return Procedure ..........................18 Contact Us ..................
-
Page 5: Introduction
The carrier is responsible for any damage incurred during shipping. Therefore, if the received merchandise appears to have been damaged during shipping, the customer must submit the damage report and any related claims to the carrier, not ILUMINARC®. The customer must Useful information. -
Page 6: Safety Notes
User Manual will only apply to properly certified · Always disconnect this product from its power source before servicing. ILUMINARC® technicians. · Always connect this product to a grounded circuit to avoid the risk of electrocution. Do not open the housing or attempt any repairs ·... -
Page 7: Product Description
Product Description 2. Product Description The Ilumipanel™ 24g2 IP is a flat panel wash product that may be used to light a variety of both indoor and outdoor applications. The product consists of the main housing and a steel yoke. The DMX input and output is located on the rear of the product near the bottom. Features ·... -
Page 8: Product Overview
Product Description Product Overview GORE® Valve Data In/Out Power In Rear View Adjustment Knob Side View 3 W LEDs Front View Ilumipanel™ 24g2 IP User Manual Rev. 3... -
Page 9: Product Dimensions
Product Description Product Dimensions 12.07 in 306 mm 11.85 in 301 mm 4.08 in 104 mm Ilumipanel™ 24g2 IP User Manual Rev. 3... -
Page 10: Installation
The Ilumipanel™ 24g2 IP has 3 mounting points on the mounting bracket to secure it to almost this product away any surface provided that it can support the product’s weight. ILUMINARC® recommends from any flammable following the general guidelines below when mounting the Ilumipanel™ 24g2 IP. -
Page 11: Ac Power
Installation Always connect the Ilumipanel™ AC Power 24g2 IP to a protected circuit with an The Ilumipanel™ 24g2 IP has an auto-ranging power supply that works with an input voltage appropriate electrical range of 100–277 VAC, 50/60 Hz. ground to avoid the risk of Make sure that you are connecting this product to the proper voltage, as per the specifications electrocution or fire. -
Page 12: Dmx Linking
If you are not familiar with the DMX standard, or if you need information about the DMX 32 products should be cables needed to link the Ilumipanel™ 24g2 IP to a DMX controller, you may download the connected on one daisy DMX Primer from the ILUMINARC® website at http://www.iluminarc.com/reports/dmx- chain without using a primer. -
Page 13: Controllers
Installation Controllers If you have not The Ilumipanel™ 24g2 IP can operate with a standard DMX controller, the ILUMICON configured the controller, or the ILUMICODE addresser. The sections below provide information on how to DMX starting connect these products to the corresponding controllers. The instructions to operate these address and DMX mode for each products with each of the above controllers are in the... -
Page 14: Ilumicode Addresser
DMX address. Important: The Ilumicode must be used to configure this product. The Ilumicode can be ILUMINARC® suggests that you purchased separately through your ILUMINARC® sales representative. connect no more than 20 products in this mode and keep the total distance to less than 60 m (197 ft). -
Page 15: Operation
Operation 4. Operation ILUMICODE ADDRESSER The Ilumipanel™ 24g2 IP needs an external controller, the Ilumicode addresser (“Ilumicode”), to change its configuration. Ilumicode Panel Description Button Function <MENU> Exits from the current menu or function. Enables the currently displayed menu or sets the currently selected value into the selected <ENTER>... -
Page 16: Static Colors
Operation Static Colors 1. Go to STATIC. 2. Select a color or effect (Red, Green, Blue, or Strobe). 3. Select a color value (000–255) or a strobe frequency (0–20). Dimmer This setting gives the user four different options to simulate the dimming curve of an incandescent lighting product. -
Page 17: Menu Map
Operation Menu Map Main Level Programming Levels Description Sets the DMX starting address 001–512 ARC 1 3-channel: RGB control 4-channel: RGB control + dimmer ARC 1 + D PERSON 7-channel: RGB control, dimmer, color macro, strobe, ARC FULL dimmer speed SOLID 1-channel: Dimmer WHITE (1–11) -
Page 18: Dmx Values
Operation DMX Values ARC FULL Channel Function Value Percent/Setting 000 ó 255 Dimmer 0–100% 000 ó 255 0–100% 000 ó 255 Green 0–100% 000 ó 255 Blue 0–100% 000 ó 010 No function 011 ó 030 R: 100% G: 0–100% B: 0 031 ó... -
Page 19: Technical Information
6. Gently polish the external glass surfaces until they are free of haze and lint. Product Repairs ILUMINARC® strongly advises you against attempting any repairs to this product unless you are an authorized ILUMINARC® technician. Ilumipanel™ 24g2 IP User Manual Rev. 3... -
Page 20: Photometrics
Technical Information Photometrics Ilumipanel™ 24g2 IP User Manual Rev. 3... -
Page 21: Led Disclaimer
LED Disclaimer LED Life ILUMINARC® rates LED lifetime based on lumen depreciation of 70% of the original output, with data provided by the manufacturer of the LED. Data from the manufacturer of the LED are not independently verified or measured by ILUMINARC®. When the product is operating in optimal environmental conditions, the LED lifetime is rated to be 50,000 to 70,000 hours by the LED manufacturer. -
Page 22: Return Procedure
The user must clearly label the package with an RMA #. ILUMINARC® will refuse any product(s). product returned without an RMA #. DO NOT write the RMA # directly on the box. -
Page 23: Technical Specifications
Technical Specifications Technical Specifications Length Width Height Weight Dimensions and Weight 12.07 in (306 mm) 4.08 in (104 mm) 11.85 in (301 mm) 14.8 lbs (6.7 kg) Note: Dimensions in inches rounded to the nearest decimal digit. Power Supply Type Range Voltage Selection Electrical... - Page 24 Ilumipanel™ 24g2 IP User Manual...
Need help?
Do you have a question about the ILUMIPANEL 24g2 IP and is the answer not in the manual?
Questions and answers