Table of Contents
Advertisement
WiFi LED
8 A computer, mobile phone, game station, or other device with wireless 802.11n, g, or b
capability can access the Internet wirelessly through the mobile broadband router. To
make the WiFi-compatible wireless connection, you must first locate the wireless network
connection setup on your device, and then select the Zoom network. For example, on
Windows computers, click the wireless connection icon on the Task Bar, click Available
Wireless Networks, select Zoom from the list of available wireless networks, and then
make the connection.
9 The router comes set up for wireless with no security. If you want wireless security, you
need to set up the router and each device for the security that you want.
10 You may want to plug a computer or other device into the router's Ethernet port. This is
recommended if you're changing the router's default values, and sometimes an Ethernet
connection is more convenient or secure than connecting to the router wirelessly. To
connect via Ethernet, simply plug the router's Ethernet cable between the router's
Ethernet port and your computer or other device's Ethernet port, then re-boot the
computer to make sure it knows that the Travel Router is plugged in.
11 Open your browser on computer or other device that is connected to the Travel Router
wirelessly or via an Ethernet cable. Verify that your are able to connect to the Internet. If
you are unable to connect, refer to the Troubleshooting section below.
If you are able to connect to the Internet and you have already set up wireless security (or are
choosing not to), your setup is complete. Congratulations!
Troubleshooting Your Internet Connection
If you are unable to connect to the Internet through your router, please check the
following:
1
If you are connecting a device wirelessly to your Travel Router, make sure that the
device has the same security settings as the Travel Router. If it does not, you will
Chapter 1. Installing the Travel Router with Wireless-N
Ethernet LED
a Most users should set the Travel Router's security settings by
using the Setup Wizard. For more information and instructions,
please refer to
Chapter 2: Using the Configuration
starting on page 11.
b A computer, phone, tablet, game station, or other device
connecting wirelessly to the Travel Router needs to be set up
properly.
Chapter 3
need them, and you may also want to look at the instructions for
each particular device.
USB LED
gives some useful suggestions in case you
Manager,
9
Advertisement
Table of Contents
