Table of Contents
Advertisement
Note: Later, if you change the System Password, you will use the new password to
log in.
4
When you log in, the Configuration Manager opens its Main Menu. Select
Wireless on the left hand menu.
5
In the Authentication drop down bar select WPA – PSK/WPA2 – PSK. If you
know all your devices support WPA2-PSK you can select it instead.
6
In the Preshare Key field enter a value for the key. The maximum value is 42
characters. The minimum value is 8 characters.
7
Write down this passphrase and put it where you can find it – on the bottom of
the Travel Router case, for instance.
8
Click Save. If you are connected wirelessly to the travel router you will lose the
connection as soon as you click Save. When you re-establish your wireless
connection you will be prompted for the preshared key that you just entered.
You must enter this key to be able to connect to the Travel Router.
9
Now you need to set up each of your wireless devices with the Preshared Key
that you entered. See
instructions on connecting devices to the Travel Router.
Chapter 4: Configuring Wireless Security Manually
Establishing your Wireless Network
on page 30 for
39
Advertisement
Table of Contents
