Microseven Systems M7B15 User Manual page 22

M7 Stationary HD Megapixel IP Camera Series
User Manual
2. Establish Camera Name parameters.
a. Camera Name String: Name the camera to distinguish it from other cameras. The
maximum length for the name is 30 characters.
b. Position: Display the camera name on the top or bottom of the video window. Make
sure to check the 'Name' checkbox in the OSD Setting if you want the camera name to
appear on the screen.
3. For On Screen Display (OSD), check the camera and name box to display it on the screen.
4. Use the 'Refresh' button to reset all field contents.
5. Click 'Apply' to save the settings.
3.1.9.2 Network Settings
1. By default, the camera network is set to DHCP and the IP address, subnet mask, and default
gateway parameters are automatically assigned.
For static IP implementations, disable the DHCP setting by selecting Static IP address type.
Manually enter your preconfigured IP address (mapped to the camera's MAC address), Subnet
mask, and Gateway parameters.
2. The DNS type is set to 'Dynamic DNS' by default. You can change the DNS type to 'DNS' when
using static IP addressing and use primary DNS address of 8.8.8.8 and an alternate DNS address
of 8.8.4.4, if desired.
3. The HTTP port is set to 80 by default.
4. The default port for RTSP is 554.
5. The default port for RTMP is 1935.
6. If your router is configured to use UPnP settings, check the Enable UPnP box. Click the 'Test
UPnP' button to test that your router has appropriately mapped the port forwarding
parameters.
7. Click 'Apply' to save the settings.
3.1.9.3 Wireless Settings
1. Click the 'Search' button to open wireless device search dialog.
2. Highlight the wireless device from the search list, then click the 'Add' button.
3. Select the Infra Network type when using a wireless router
4. Select the Security type associated with your route (choose from None/WEP/WPA-PSK/WPA2-
PSK)
5. Enter your wireless network password.
6. Click 'Apply' to save the settings.
3.1.9.4 Email Settings
M7CMS supports three event detection types including motion detection, video lost detection and I/O
alerts. When the event is detected, M7CMS will send an alert message and a captured snapshot to your
email box.
© 2001 - 2016 Microseven Systems, LLC Page | 19