Drying Inside Operation; Automatic Operation; Manual Operation - Mitsubishi Electric MJ-E14CG-S1-SWE Instruction Manual

Drying Inside Operation

The inside of the unit can be dried to suppress mildew growth on the cooler.
On days the dehumidifier is used, drying inside is recommended.

Automatic operation

To activate drying inside after every use.
Press
Drying inside standby
l
(Drying inside lamp lit)
Drying inside starts when operation
ends
When the unit is turned off, INTELLIGENT
LAUNDRY mode ends, or the OFF timer ends.
Drying inside starts
l
The Drying inside lamp flashes, the humidity
indicator turns off, and the louvre stops in the
vertical position.
Drying inside mode
Drying inside ends
l
The Drying inside lamp turns off and the
louvres shut.
<To deactivate automatic operation>
Press the drying inside button while the unit is on
(the Drying inside lamp turns off)
Connecting/disconnecting the power plug deactivates automatic operation.
l
This function does not remove existing mildew. Also, aborting drying inside may cause the benefits to diminish.
l
Do not close the louvres while drying inside as this causes noise.
l
The moisture expelled from inside the unit may cause the humidity level of the room to rise.
l
The air leaving the unit may appear white depending on the humidity or temperature of the room.
l
The moisture expelled from inside the unit may smell due to odorants* that were not caught by the filter dissolving in the
l
water.
* The silver ion filter is mainly for absorbing ammonia.
The OFF timer cannot be set during drying inside.
l
<Drying inside operation>
OFF
Regular
operation
Airflow
Dehumidifier
Approx.
Air purifier
30 min.
while the unit is on
This operation takes approximately one hour. However, when the room
temperature is below 1°C, drying time is shortened to protect the
compressor.
Drying inside operation (approx. one hour.)
Airflow stops; compressor
activates (operating sound)
Compressor operates
according to room temperature

Manual operation

To activate drying inside by pressing a button.
Press
Drying inside starts
l
The Drying inside lamp flashes, the humidity
indicator turns off, and the louvre stops in the
vertical position.
Drying inside mode
Drying inside ends
l
The Drying inside lamp turns off and the
louvres shut.
To abort drying inside
Press the drying inside button while the unit
is performing drying inside (the Drying inside
lamp turns off)
Press the power button to abort drying inside,
and resume normal operation.
Operating
Compressor
sounds
stops
Approx. 20 min.
while the unit is off
Unit
stops
Airflow
auto-
mati-
Approx.
cally
10 min.
1