Quick Setup Diagram - Numark CM-100 User Manual

CM100

QUICK SETUP DIAGRAM

Study this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all stereo
input sources. Next, connect your microphone(s) and monitor headphones. Finally, connect the stereo outputs to
the power amplifier(s) and/or audio sources. Plug your mixer into AC power. Now you are ready to switch
everything on. Always switch on your audio input sources such as turntables or CD players first, then your mixer,
and finally any amplifiers. When turning off, always reverse this operation by turning off amplifiers, then your
mixer, and then input devices.
- The Leader in DJ Technology
©1999 Industries - 7 - http://www.numark.com