The People of Numark REGISTRATION Please go to http://www.numark.com to register your C3USB. Registering your product ensures that we can keep you up-to-date with any last-minute product developments and provide you with world-class technical support, should you run into any problems.
CD players, samplers, etc. in position. Replace the fader with a quality authorized replacement from your local Numark Select “USB” if you would like to route audio retailer only. from a computer connected to the rear of the mixer via USB.
FADER START – When activated, METER ASSIGN – Determines whether PFL or crossfader will send play and cue digital pulse MASTER audio level is sent to the stereo LED commands to compatible fader-start devices meter. connected to the rear panel. To take advantage STEREO LEVEL INDICATOR –...
11. USB SELECT – These switches determine the 12. AC IN – While the power is off, use the included functionality of the USB ports. power supply cable to connect the mixer to a power outlet. USB A: 13. VOLTAGE SELECTOR – This 2-position switch RECORD –...
MAC CONFIGURATION Turn on your computer and the C3USB. Use a USB cable to connect one (or both) ports of the C3USB to your computer. Windows will immediately recognize the mixer as a “USB Audio Device” or “USB Audio CODEC”. To change system audio preferences on a Mac, you will need to access the Audio MIDI Setup preferences located in Applications...
TROUBLESHOOTING Problem: The computer did not recognize my mixer. • The mixer is not turned on. Turn on your mixer. • The USB cable is not connected. Connect the USB cable to your computer and mixer. • You have already installed a USB Audio Device before. In that case, your mixer should work without any installation process.