Quick Setup Diagram - Numark DM3001X Owner's Manual

DM3001X

QUICK SETUP DIAGRAM

Study this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all
input sources and processors. Next, connect your microphone and monitor headphones. Finally, connect the
stereo outputs to the power amplifier(s) and/or audio receivers such as tape decks. Plug your mixer into AC
power. Now you are ready to switch everything on. IMPORTANT: Always switch on your audio input
sources such as turntables or CD players first, then your mixer, and finally any amplifiers. When turning off,
always reverse this operation by turning off amplifiers, then your mixer, and then input devices.
Zone
- The Leader in DJ Technology
©2001 Industries http://www.numark.com
- 9 -