Table of Contents
Advertisement
The phone and PC are now connected. The phone's name
8.
should appear in the Connected devices area in the Kies
software on the PC.
You can now use the Kies software to transfer files, upgrade
the phone's firmware, etc.
USB utilities
This option allows you set the USB cable connection mode to
allow copying files between your PC and the memory card in your
phone.
From the Home screen, tap
1.
USB utilities
Connect storage to PC.
Connect a USB cable from your phone to your PC.
2.
When "USB connected" appears on the phone, tap Turn on
3.
USB storage.
Note: If prompted to turn USB debugging mode off, tap OK.
When "USB storage in use" appears on the phone, your
4.
phone is listed on the computer as a removable disk.
Open the folder to view files and copy or move them
5.
between your PC and memory card.
106
Settings
More...
➔
To exit, tap Turn off USB storage.
6.
VPN
The VPN settings menu allows you to set up and manage Virtual
Private Networks (VPNs).
Important!: Before you can use a VPN you must establish and configure one.
Adding a VPN
Before you add a VPN you must determine which VPN protocol to
use: PPTP (Point-to-Point Tunneling Protocol), L2TP (Layer 2
Tunneling Protocol), L2TP/IPSec PSK (Pre-shared key based
L2TP/IPSec), or L2TP/IPSec CRT (Certificate based L2TP/IPSec).
Before using VPN, you must first set up a screen unlock PIN
1.
or password. For more information, refer to "Screen Lock"
on page 118.
From the Home screen, tap
2.
VPN.
Tap Add VPN network.
3.
Enter a name for the VPN network in the Name field.
4.
Select a VPN type from the Type drop-down menu. The
5.
options are:
Settings
More...
➔
➔
Advertisement
Table of Contents
