Usb Utilities; Usb Tethering - Samsung Galaxy S Blaze 4G User Manual

Activating Visibility
Press
Wireless and network
The device is now activated for discovery other devices for
a period of time determined by the value set within the
Visible time-out menu.
Note: Your device visibility is based on the time set within the Visible
time-out field (2 minutes, 5 minutes, 1 hour, or Never). This value
appears as a countdown within this Visible time-out field.
Scanning for Devices
This option allows you to scan for active Bluetooth devices so you
can pair with them.
Press
1.
Wireless and network
Scan for devices. Your phone begins scanning and lists any
discovered devices in the Bluetooth devices section.
Tap a device name to pair with the device.
2.
Important!: Some Bluetooth devices are secured and require a PIN number to
confirm and pair with them.
212
and then tap (Settings)
Bluetooth settings Visible.
and then tap (Settings)
Bluetooth settings
Enter a PIN to pair with the device, if one is required, and
3.
tap OK.

USB Utilities

Press
1.
Wireless and network
PC.
If prompted, tap OK to turn USB debugging mode off.
2.
Plug in a compatible USB cable to begin using the device
3.
for mass storage mode.

USB Tethering

This option allows you to share your phone's mobile data
connection via a direct USB connection between your phone and
computer. A wireless version of this same functionality would be
the Mobile AP feature.
Note: You can not mount your phone's microSD card to your computer while
using the USB tethering feature. If additional software or USB drivers
are required, navigate to:
.
downloads
Press
Wireless and network
For more information, refer to "USB Tethering" on page 200.
and then tap (Settings)
USB utilities Connect storage to
http://www.samsung.com/us/support/
and then tap (Settings)
USB tethering and Mobile HotSpot.