Table of Contents
Advertisement
From the Bluetooth settings page, tap Scan to search for
2.
visible external Bluetooth-compatible devices such as
headsets, devices, printers, and computers.
Pairing Bluetooth Devices
The Bluetooth pairing process allows you to establish trusted
connections between your device and another Bluetooth device.
When you pair devices, they share a passkey, allowing for fast,
secure connections while bypassing the discovery and
authentication process.
To pair your device with another Bluetooth device:
Verify Bluetooth is active.
1.
From the Bluetooth settings page, tap you phone's name to
2.
place a checkmark in the selection box and make it visible
to other devices. Your device must be visible to successfully
pair with an external device.
Tap Scan for devices. Your device will display a list of
3.
discovered in-range Bluetooth devices.
Tap a device from the list to initiate pairing.
4.
Enter the passkey or PIN code, if needed, and tap OK.
5.
98
The external device will then have to also accept the
6.
connection and enter your device's PIN code.
Once successfully paired to an external device,
appears within the Status area.
Note: Due to different specifications and features of other Bluetooth-
compatible devices, display and operations may be different, and
functions such as transfer or exchange may not be possible with all
Bluetooth compatible devices.
Note: Pairing between two Bluetooth devices is a one-time process. Once a
pairing has been created, the devices will continue to recognize their
partnership and exchange information without having to re-enter a
passcode again.
Deleting a paired device (unpair)
Deleting a device from your list removes its "connection record"
and requires that you re-enter all the pairing information in order to
reconnect.
Verify your Bluetooth is active.
1.
From the Bluetooth settings page, tap
2.
of the previously paired device.
Tap Unpair to confirm disconnection.
3.
at the right side
Advertisement
Table of Contents
