Safety Instructions - K-array OVERBASS Ko70 User Manual

SAFETY INSTRUCTIONS

• To reduce the risk of electric shock, disconnect the
installing audio cable. Reconnect the power cord only after making all signal connections.
• Connect the amplifier
receptacle must be connected to a fuse or circuit breaker. Connection to any other type of
receptacle poses a shock hazard and may violate local electrical codes.
• Do not install the amplifier in wet or humid locations without using weather protection.
• Do not allow water or any foreign object to get inside the
containing liquid on, or near, the unit.
•No naked flame sources such like lighted candles should be placed on the device.
• To reduce the risk of overheating the
not install the unit near heat emitting appliances, such as a room heater or stove.
• The amplifier should be placed so that its location does not interfere with its proper
ventilation. For example, the appliance should not be situated on a bed, carpet, or similar
surface that may create an obstacle for the ventilation openings.
• This amplifier contains potentially hazardous voltages. Do not attempt to disassemble
the unit. The unit contains no user serviceable parts. Repairs should be performed only by
factory trained service personnel.
USER'S MANUAL
!
to a two-pole, three wire grounding mains receptacle. The
amplifier
CAUTION
This symbol, wherever it appears, alerts you to
important operating and maintenance istructions in
the accompanying literature. Read the manual!
amplifier from the AC mains before
amplifier
, avoid exposing it to direct sunlight. Do
. Do not put objects
P. 1